3004

From NDWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

3004 is the 10 MB Disk Controller.

Introduction

What does it do?

Switches and indicators

From top of the card

  • Read - yellow LED - indicating read transfer.
  • Write - yellow LED - indicating write transfer.
  • Parity - yellow LED - indicating read parity.
  • Compare - yellow LED - indicating compare transfer.
  • Op. Ind. - yellow LED - indicating start or active set by control word bit 2 (activate).
  • Error - red LED - indicating different error conditions (timeout, address mismatch, etc.)

Device number - thumbwheel switch, with the following settings:

  • 0 - Disk system 1, Device no. 500, Ident no. 1
  • 1 - Disk system 2, Device no. 510, Ident no. 5

Setting 2 - 15 is not used.

IOX address bit 15 active will inhibit this card.

Connectors

The A and B connectors are used for I/O, the C connector is used for the ND-100 Bus.

I/O Devices on the card

none?

Reference

Norsk Data Document ND–06.015.02 ND-100 FUNCTIONAL DESCRIPTION