3006
Jump to navigation
Jump to search
3006 is the Pertec magnetic tape module.
 |
This article is a stub. You can improve NDWiki by expanding it. |
Introduction
Pertec tape controller.
Switches and indicators
From top of the card:
Yellow LED indicators
- Read - read from the tape
- Write - write to the tape
- PD CLCK - a data transfer is in progress
- Active - Controller active
Device number - thumbwheel switch with the following positions:
- 2 - Mag. tape 1, Device no. 520, Ident no. 3
- 3 - Mag. tape 2, Device no. 530, Ident no. 7
Setting 4 - 15 is not used.
IOX address bit 15 active will inhibit this card.
Connectors
The A and B connectors are used for I/O, the C connector is used for the ND-100 Bus.
I/O Devices on the card
none?
ECO
ECO or Engineering Change Order is a hardware change. Here is a list of known ECO's for this card.
- ECO 100-756 - false interrupt or wrong ident code.[1]
- ECO 100-757B - DMA-error when copying to/from tape[1]
Reference
- Norsk Data Document ND–06.015.02 ND-100 FUNCTIONAL DESCRIPTION
- Norsk Data Document ND–30.008.3 EN ND-100 Hardware Maintenance