IOX

From NDWiki
Revision as of 17:05, 1 February 2009 by Mike (talk | contribs) (Spelling)
Jump to navigation Jump to search

IOX instruction is used for programmed IO. IOX is a privileged instruction in normal cases but if there is no OS running and the paging system is turned off then IOX is an unprivileged instruction. IOX and IOXT are the only instructions used to communicate with external instructions.

IOX transfers data between a device I/O register and the CPU's A register.

Bit 0-10 of the instruction code sets the direction and IO address. If bit 0 is zero then IOX reads the value from the IO register into register A. If bit 0 is one then IOX writes the contents of register A to the IO register.

Addressing of a non existing device results in a IOX error.

Se also

References