ND100 emulator project

From NDWiki
Revision as of 09:31, 24 May 2011 by Roger (talk | contribs) (→‎Code)
Jump to navigation Jump to search

The ND100 Emulator Project (nd100em) strives to be able to completely run ND-100 code and emulate a ND-100 computer to the degree it can boot and run SINTRAN III.

Authors

  • Per-Olof Åström
  • Roger Abrahamsson
  • Zdravko Dimitrov
  • Göran Axelsson

Status

  • In active development. Most of the basic instructions implemented and some of the system ones. MMS implemented. Able to run some ND100 software.
  • It can run BPUN files, but has a long way until all system functions are working. MAC sort of works, as well as INSTRUCTION-B, which is the main test program used for now to see how well it behaves.
  • Version 0.1.6 introduced functions to measure emulator speed, and on a 2.6GHz P4, it is around 5-10 times on average faster than an original ND-100, counted per instruction over a large number of instructions. The code is NOT optimized for speed at all.
  • Version 0.1.9 runs a lot more code, and can handle BPUN files straight off.
  • Usually the projects experimental code is further ahead than these versions available here.

Wanted Information

  • Specifications for IOX1-3.
DoneDone Partially solved, Rack Controller.
  • Specifications for IOX4-7.
DoneDone Partially solved, Memory Parity.
  • Information about expected behaviour of CLEPT and SETPT (Inparameters, effects etc)
  • Information about undocumented instructions, particularly 142700...
DoneDone Partially solved
142700 - GECO
161000 - IOT SKA
  • PROG File format.
DoneDone Solved
  • Details of Floppy IOX calls...
DoneDone Solved, see 3010.
  • Newer version of INSTRUCTION VERIFY, this one lacks test for BCD and CX instructions.
Current one is...
DATE ISSUED - 83.11.01

Known Bugs

  • MOVB
Needs fixing for a few edge cases.
  • MOVBF
Total rewrite needed.
  • NLZ
Not properly identified yet what needs to be done.
  • DNZ
Not properly identified yet what needs to be done.
  • FAD
Not properly identified yet what needs to be done.
  • FDIV
Not properly identified yet what needs to be done.

Documentation

Some online documentation is generated with Doxygen.

Code

Latest development code can be found in the development git tree.

  • v0.1 - Initial release, able to run image of ND100 MAC
  • v0.1.1 - New command parser, some floating point support
  • v0.1.2 - Rearranged to new structure, new instructions added
  • v0.1.3 - Lots of bugfixes and some more instructions
  • v0.1.4 - multithreading, IOX infrastructure. Bugfixes.
  • v0.1.5 - Runlevel switching in WAIT, basic rtc interrupt functionality, fixes all over
  • v0.1.6 - IDENT infrastructure, Config file handling, bugfixes, profiling
  • v0.1.7 - Bugfixes, handles paging and interrupt. New tracing model.
  • v0.1.8 - Bugfixes, partially runs INSTRUCTION-B testprogram now.
  • v0.1.9 - Bugfixes,new tracing, runs INSTRUCTION-B to a degree we can use it to test instructions.
  • v0.2.0 - Corrected PT/APT handling, IRQ fixes, runs completely through PAGING-B.BPUN, don't crash out on RTC-12-1902B.BPUN anymore.