NORD-50 monitor

From NDWiki
Revision as of 21:22, 19 April 2014 by Tingo (talk | contribs) (added link for NORD-50)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The NORD-50 monitor is a subsystem in the SINTRAN operating system, supervising execution of NORD-50 programs.[1]

To use the monitor, it must have been loaded into SINTRAN as an RT program. The monitor is then started under SINTRAN by typing

 @N-50

on a terminal connected to the system.

Main tasks[1] of the monitor are:

  • loading programs from files into NORD-50 memory. These programs must have an executable format prepared by the NORD-50 loader. (:NOR5)
  • starting the programs.
  • reporting errors during program execution.
  • examining the NORD-50 registers / memory after the programs have come to a stop (normal or abnormal stop).

Commands

The '*' is written by the monitor.[2]

*PLACE <file name or number>
load a program
*RUN
Start execution of the placed program
*LOAD <file name or number>
Load and start execution of a program, in effect PLACE and RUN
*GO TO <address>
start in given address

References and sources

  1. 1.0 1.1 30.001.01A NORD-10/NORD-50 Operator's Guide, Chapter 4.4
  2. Norsk Data Document ND–30.001.01A NORD-10/NORD-50 OPERATOR'S GUIDE Printed May 1982, Section 4.4.1