Software list

From NDWiki
Revision as of 11:20, 6 June 2016 by Gandalf (talk | contribs) (Added hyperlink)
Jump to navigation Jump to search

This is a compilation of known software for the Norsk Data computers. It contains both programs released by Norsk Data AS and third part programmers. Links to online resources and references to where copies could be found should also be included.

The Software lab at 11th floor in Økern Business Center, 1975

Software from Norsk Data AS

  • ND-10324E Test program floppy 1[1]
  • ND-10325B Test program floppy 2[1]
  • ND-10326B Test program floppy 3[1]
  • ND-10007 Scientific Subroutine Package (48-bit)
  • ND-10009 Scientifc Subroutine Package (32-bit)
  • ND-10016 IBM 3270 Emulator
  • ND-10018 RPG-II (RPG Compiler)
  • ND-10176 COBOL for ND-100/NORD-10
  • ND-10177 ND-500 COBOL
  • ND-10196 ND-100 APL (48-bit)
  • ND-10309 PLANC for ND-100
  • ND-10310 PLANC for ND-500
  • ND-10311 ND-500 Assembler
  • ND 10342 ND Transaction Processing System - TPS-II[2]
  • ND 10373 IS XMSG[3]
  • ND 10374 COSMOS Basic Module[3]
  • ND-10403 COSMOS X.21 Option[4]
  • ND-10573 COSMOS X.25 Option[5]
  • ND-10741 SNA Gateway Single Line[6]
  • ND-10742 SNA Terminal Emulator[6]
  • ND-210024 ND-100 BASIC
  • ND-210034 ND-100 BASIC
  • ND-210191 Fortran 77 for ND-100/NORD-10
  • ND-210405 COSMOS X.29 PAD
  • ND-210741 SNA Gateway Single Line
  • ND-210742 SNA Terminal Emulator
  • ND-210771 ND Coloured Books Job and File transfer
  • ND-210855 ND Disk Mirror and Error Logger
  • ND-210866 ND Coloured Books File Transfer
  • ND-210873 ND I/O Line Switch
  • ND-211003 ND Pascal for ND-500
  • ND-211196 Fortran 77 for ND-500
  • NOTIS, a text processing system.[7]
  • QED, text editor.
  • SINTRAN III
  • SPRINT 211056 Spooling system[8]
  • TELEFIX, remote computer analyze program[9]

List of test programs we have access to

  • 100-ERRCOR-2339B.BPUN 18K
  • CACHE-2063D.BPUN 38K
  • CONFIGURATIO-C08.BPUN 46K
  • DIMS-1453G.BPUN 17K
  • DISC-TEMA-H33.BPUN 72K
  • DSERV-1395A.BPUN 3.3K
  • ECCTEST-2224B.BPUN 14K
  • FL-LOOPS-1996A.BPUN 1.1K
  • FLOPP-FORM-1990B.BPUN 5.6K
  • FLOPPY-FUNCT-H00.BPUN 7.0K
  • FLOPPY-RAN-1988B.BPUN 9.3K
  • FLOPPY-STREA-B00.BPUN 49K
  • HDLC-MEGALIN-C00.BPUN 30K
  • INSTRUCTION-B.BPUN 45K
  • LP-TEST-D01.BPUN 19K
  • MEMORY-C03.BPUN 35K
  • MOVER-1863C.BPUN 3.5K
  • MULTI-1820P.BPUN 22K
  • PAGING-B.BPUN 25K
  • PARAL-BYTE-1942C.BPUN 6.1K
  • PASCAN-2226A.BPUN 12K
  • PFAIL-1355G.BPUN 2.9K
  • RTC-12-1902B.BPUN 2.3K
  • SMALL-RAND-2448A.BPUN 16K
  • STC-RUNNER-2410B.BPUN 24K
  • STC-TEST-2411E.BPUN 30K
  • SUPER-RAND-F00.BPUN 13K
  • SYNC-MODEM-A.BPUN 22K
  • TANB-MAG-1559H.BPUN 8.3K
  • TECOD-1451E.BPUN 7.0K
  • TERMINAL-ASY-E00.BPUN 32K
  • TET2200-A.BPUN 26K


These programs have been stripped for easy loading as binary only by the nd100emu ND100 emulator project, the start address is in the name.

  • FL-LOOPS-1996A.BPUN.start00000.bin 608
  • INSTRUCTION-B.BPUN.start00000.bin 45K
  • MEMORY-C03.BPUN.start00000.bin 34K

Software mentioned in other sources

CAT[10] Common Abstract Tree Language. R. Voeller & Uwe Schmidt, U Kiel, Germany 1983. Universal intermediate language, used by Norsk Data in their family of compilers. "A Multi-Language Compiler System with Automatically Generated Codegenerators, U. Schmidt et al, SIGPLAN Notices 19(6):202-2121 (June 1984).

NODAL[10] Interpreted language implemented on Norsk Data's NORD-10 computers. Used by CERN and DESY high energy physics labs to control their accelerator hardware, PADAC and SEDAC. Included trackball input, graphics.

GETNORD[11] Reading NORD diskettes to a CP/M based microcomputer. GETNORD is a member of a set of two programs used for transfer of files between a minicomputer NORD and a CP/M based microcomputer. The programs are particularly well suited for transfer of all sorts of text files, written in international ASCII (or, national adapted ASCII versions). GETNORD runs on a CP/M based microcomputer and will perform reading NORD diskettes, with their 512 bytes sectors and their special directory format. The micro must be equipped with at least one normal 8 inch diskette drive, and its disk controller must be able to take 512 bytes sectors, single density. The companion program is GETCPM, a program running on NORD and able to read diskettes written by a CP/M based microcomputer. The two programs work quite independently, however, and they may be obtained individually. Vendor: Odd Pettersen, Hoemshøgda, 7000 Trondheim, Norway.

Software from third part

  • 5 cm of program listings. (Forth + other)

References and sources

  1. 1.0 1.1 1.2 Norsk Data Document ND–30.005 TEST PROGRAM DESCRIPTIONS
  2. Norsk Data Document ND–30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER
  3. 3.0 3.1 Norsk Data Document ND–30.025 COSMOS OPERATORS GUIDE
  4. Norsk Data Document ND–30.033 COSMOS X.21 OPTION OPERATOR GUIDE
  5. Norsk Data Document ND–30.034 COSMOS X.25 OPTION OPERATOR GUIDE
  6. 6.0 6.1 Norsk Data Document ND–30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE
  7. Det norske datafyrtårnet
  8. Norsk Data Document ND–60.252 THE SPRINT USER GUIDE
  9. Norsk Data Document ND–30.031 ND-100 COMPACT OPERATOR GUIDE
  10. 10.0 10.1 Free On-line Dictionary of Computing
  11. NOCUS Software July 1983, page 201