ND-100/CX Compact 3392.1669 - Revision history

Tingo: /* 2023 */ document that an image of the hard drive has been made.

2023-10-22T16:03:26Z

2023: document that an image of the hard drive has been made.

← Older revision		Revision as of 16:03, 22 October 2023
Line 76:		Line 76:
	== History ==		== History ==
	=== 2023 ===		=== 2023 ===
			; 2023-10-18 : with help from [[User:RHansen\|RHansen]] who has a [https://www.pdp8online.com/mfm/ MFM Emulator] we proceeded to make an image of the hard drive in the machine. Partly successful at least - I can read filenames and extract files with the ndfs tool. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 16:03, 22 October 2023 (UTC)

	; 2023-10-18 : verified that there is no ethernet cabling or connector (neither AUI, bnc nor RJ45) in the machine. Perhaps it never had it. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 19:51, 19 October 2023 (UTC)		; 2023-10-18 : verified that there is no ethernet cabling or connector (neither AUI, bnc nor RJ45) in the machine. Perhaps it never had it. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 19:51, 19 October 2023 (UTC)

Tingo: /* 2023 */ no ethernet cabling in the machine

2023-10-19T19:51:37Z

2023: no ethernet cabling in the machine

← Older revision		Revision as of 19:51, 19 October 2023
Line 76:		Line 76:
	== History ==		== History ==
	=== 2023 ===		=== 2023 ===
			; 2023-10-18 : verified that there is no ethernet cabling or connector (neither AUI, bnc nor RJ45) in the machine. Perhaps it never had it. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 19:51, 19 October 2023 (UTC)

	; 2023-09-30 : To do - test with a floppy drive from another machine in this one (I think I ran this test, but the results are not documented here, so better re-run the test). Check if the s3-config program reports which ethernet card (if any) this SINTRAN was configured for. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 08:23, 30 September 2023 (UTC)		; 2023-09-30 : To do - test with a floppy drive from another machine in this one (I think I ran this test, but the results are not documented here, so better re-run the test). Check if the s3-config program reports which ethernet card (if any) this SINTRAN was configured for. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 08:23, 30 September 2023 (UTC)

Tingo: /* History */ add a 2023 section

2023-09-30T08:24:14Z

History: add a 2023 section

← Older revision		Revision as of 08:24, 30 September 2023
Line 75:		Line 75:

	== History ==		== History ==
			=== 2023 ===
	; 2023-09-30 : To do - test with a floppy drive from another machine in this one (I think I ran this test, but the results are not documented here, so better re-run the test). Check if the s3-config program reports which ethernet card (if any) this SINTRAN was configured for. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 08:23, 30 September 2023 (UTC)		; 2023-09-30 : To do - test with a floppy drive from another machine in this one (I think I ran this test, but the results are not documented here, so better re-run the test). Check if the s3-config program reports which ethernet card (if any) this SINTRAN was configured for. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 08:23, 30 September 2023 (UTC)

Tingo: /* History */ add a to do list

2023-09-30T08:23:16Z

History: add a to do list

← Older revision		Revision as of 08:23, 30 September 2023
Line 75:		Line 75:

	== History ==		== History ==
			; 2023-09-30 : To do - test with a floppy drive from another machine in this one (I think I ran this test, but the results are not documented here, so better re-run the test). Check if the s3-config program reports which ethernet card (if any) this SINTRAN was configured for. [[User:Tingo\|Torfinn]] ([[User talk:Tingo\|talk]]) 08:23, 30 September 2023 (UTC)

			=== 2016 ===
	; 2016-07-14 : I took out the tape drive so I could photograph it. Labels on the drive reads: Tandberg TDC 3309 (TDC 3300 Series), ND 106270, ND 150-001442.		; 2016-07-14 : I took out the tape drive so I could photograph it. Labels on the drive reads: Tandberg TDC 3309 (TDC 3300 Series), ND 106270, ND 150-001442.
	; 2016-07-12 : I tested the floppy drive from this machine in the ND-110 Satellite ([[ND-110 Satellite 9883.21005\|9883.21005]]) but it didn't work.		; 2016-07-12 : I tested the floppy drive from this machine in the ND-110 Satellite ([[ND-110 Satellite 9883.21005\|9883.21005]]) but it didn't work.
	; 2016-07-11 : floppy drive. I unscrewed the media bay, and took out the floppy drive. It is labeled '''ND 149-116''' on the right side. On the left side is the manufacturer label. Toshiba FDD 5801A0K 01 Rev. A. Serial no: A6412496.		; 2016-07-11 : floppy drive. I unscrewed the media bay, and took out the floppy drive. It is labeled '''ND 149-116''' on the right side. On the left side is the manufacturer label. Toshiba FDD 5801A0K 01 Rev. A. Serial no: A6412496.

			=== 2011 ===
	; 2011-11-19 : tape drive - I have some DC6150 tapes. I wonder if they would work in the TDC3309 tape drive. And if I could read them in a Wangtek 5150ES drive afterwards (under FreeBSD or Linux),		; 2011-11-19 : tape drive - I have some DC6150 tapes. I wonder if they would work in the TDC3309 tape drive. And if I could read them in a Wangtek 5150ES drive afterwards (under FreeBSD or Linux),

Tingo: /* Gallery */ a picture of power supply

2023-04-18T20:02:25Z

Gallery: a picture of power supply

← Older revision		Revision as of 20:02, 18 April 2023
Line 148:		Line 148:
	File:ND-100 CX Compact panel.jpg		File:ND-100 CX Compact panel.jpg
	File:ND-100 CX Compact label.jpg		File:ND-100 CX Compact label.jpg
			</gallery>

			power supply
			<gallery mode="nolines">
			File:Power supply IMG 20230417 224305449.jpg
	</gallery>		</gallery>

Tingo: /* Hardware */ Docuemtn how to access the card cage.

2023-04-17T19:49:28Z

Hardware: Docuemtn how to access the card cage.

← Older revision		Revision as of 19:49, 17 April 2023
Line 4:		Line 4:
	== Hardware ==		== Hardware ==
	Hardware in the machine is described in this section.		Hardware in the machine is described in this section.

			The card cage is accessible from the left side (when the machine is seen from the front). Two screws needs to be loosened, then the cover slides upwards and can be removed.

	=== Cards ===		=== Cards ===
	# [[3033]] ND100 CPU, Print: S, eco: V. Card switches: ALD: 13, Console: 7 (9600 bps)		# [[3033]] ND100 CPU, Print: S, eco: V. Card switches: ALD: 13, Console: 7 (9600 bps)
Line 26:		Line 29:
	* Philips PE1049		* Philips PE1049
	=== Connectors ===		=== Connectors ===

	== Labels ==		== Labels ==
	It has a "DEMO SIM" label in red DYMO tape on the top left of the front.		It has a "DEMO SIM" label in red DYMO tape on the top left of the front.

Tingo: added Operating system section and information

2020-08-04T08:36:21Z

added Operating system section and information

@@ Line 44: / Line 44: @@
   The Fortran modules responsible for the different parts of the reactor plant use a total of between 6500 and 7000 process parameters (variables and con-
   stants). These are shared between the modules by a number of large COMMON-blocks defined in Fortran.
 == History ==

Tingo: /* Gallery */ the floppy drive is a Toshiba FDD 5801

2019-03-11T19:16:12Z

Gallery: the floppy drive is a Toshiba FDD 5801

← Older revision		Revision as of 19:16, 11 March 2019
Line 121:		Line 121:
	</gallery>		</gallery>

	Floppy drive - it is a Toshiba, labeled ND149-116 on the right side		Floppy drive - it is a Toshiba FDD 5801, labeled ND149-116 on the right side
	<gallery mode="nolines">		<gallery mode="nolines">
	File:Toshiba FDD 5801A0K front.jpg		File:Toshiba FDD 5801A0K front.jpg

Tingo: /* Gallery */ add images of tape streamer

2019-03-11T18:28:30Z

Gallery: add images of tape streamer

@@ Line 130: / Line 130: @@
 File:Toshiba FDD 5801A0K top.jpg
 File:Toshiba FDD 5801A0K jumpers.jpg
 </gallery>

Tingo: /* Gallery */ add images of floppy drive

2019-03-11T18:12:41Z

Gallery: add images of floppy drive

@@ Line 119: / Line 119: @@
 File:ND-100 CX Compact panel.jpg
 File:ND-100 CX Compact label.jpg
 </gallery>