Hardware list

From NDWiki
Revision as of 08:07, 17 January 2020 by TArntsen (talk | contribs) (3202 is used for both the 120/CX and the 125/CX)
Jump to navigation Jump to search

This is an incomplete compilation of known hardware and systems that were developed by Norsk Data AS. The list contains both systems, boards and single items mentioned in documentation and other places. Links to online resources, references and to where hardware is located will also be included.

Testing electronics at CERN with a NORD-10.

There have been several (at least two) ways of numbering products so there might be some overlap between lists. An early standard used two to four digit codes for product numbers. For example :

For more see the list of 2 digit, 3 digit and 4 digit product codes.

Later on it seems the product numbers were turned into six-digit codes, for example :

For more, see the List of 6 digit product codes.

Systems

At the start of the PC revolution Norsk Data AS tried to keep up with the times and started to sell rebranded PC products. It also branched out into unix work stations like the Dolphin series ( might have been called Uniline in the beginning ).

  • ND-5100/xi Multi user system based on Intel 80386 CPU and SCO XENIX operating system.[16]

NORD-1 Series Boards

(Main article NORD-1 boards)

There is a lot of different boards used in the NORD-1 computer. Most are numbered with a three digit code starting at 101 and at least going up to 504. The NORD-1 was one of the first computers to be constructed of integrated circuits instead of transistors. Almost all of the boards are built with the 74-series IC:s.

NORD-10 Series Boards

(Main article NORD-10 boards)

When the NORD-10 was designed the quality and professionalism shows off, solder mask, silk screen and a more compact design. The boards now have a print number and a product number. The known print numbers goes from 1001 to 1932 while the product numbers are in the range of 322000 to 322437.

NORD-50 Series Boards

(Main article NORD-50 boards)

The NORD-50 CPU is made up of three crates with a total of 82 cards. Many of the cards are the same so there are only 26 different cards. The cards are numbered from 1500 to 1532.[17]

ND-100 Series Boards

(Main article ND-100 boards)

This is a list of boards used in the ND-100 series computers based on the print number on the circuit board.

  • 3002 ND-100 CPU (Pg. 6-40 (204) ND-100 functional description )
  • 3003 MPM Line Driver[18]
  • 3004 10 MByte disk module (Appendix c, NORD-100 Input Output System)
  • 3005 16-64 kword Memory module (Appendix c, NORD-100 Input Output System)
  • 3006 Pertec magnetic tape module (Appendix c, NORD-100 Input Output System)
  • 3008 NORD-100 bus adapter (Appendix c, NORD-100 Input Output System)
  • 3009 Local IO bus (Appendix c, NORD-100 Input Output System)
  • 3010 Floppy and 4 terminals module (Appendix c, NORD-100 Input Output System)
  • 3012 Memory management module (Appendix D, ND-100 functional description)
  • 3013 8 terminal interface (Appendix D, ND-100 functional description)
  • 3015 HDLC + autoload controller (Appendix D, ND-100 functional description)
  • 3018 ECC disk controller SMD (Appendix D, ND-100 functional description)
  • 3019 ECC disk controller SMD data (Appendix D, ND-100 functional description)
  • 3020 STC magtape controller (Appendix D, ND-100 functional description)
  • 3022 ND-500 interface (Appendix D, ND-100 functional description)
  • 3023 Megalink interface (Appendix D, ND-100 functional description)
  • 3024 N10 bus adapter (Appendix D, ND-100 functional description)
  • 3026 GPIB controller (Appendix D, ND-100 functional description)
  • 3027 Floppy disk controller for DMA (Appendix D, ND-100 functional description)
  • 3028 BEX, bus expander (Appendix D, ND-100 functional description)
  • 3029 ND852 Universal DMA Interface (Norsk Data Document ND–12.020.02 UNIVERSAL DMA INTERFACE ND852 )
  • 3030 ND-100 Bus Master[19]
  • 3031 N100 bus controller (Appendix D, ND-100 functional description)
  • 3032 Memory port MPM4 (Appendix D, ND-100 functional description)
  • 3033 ND-100 CPU CX option (Appendix D, ND-100 functional description)
  • 3034 256 k memory module (Appendix D, ND-100 functional description)
  • 3036 64 k memory module (Appendix D, ND-100 functional description)
  • 3037 Ethernet I Controller (Chapter 3.4, Norsk Data Document ND–12.055.1 Ethernet II Controller )
  • 3038 8" disk controller (Appendix D, ND-100 functional description)
  • 3039 N100 bus controller (Appendix D, ND-100 functional description)
  • 3041 5 1/4" disk controller (Appendix D, ND-100 functional description)
  • 3042 1 or 2 Mbyte memory card [20]
  • 3043 ECC disk controller SMD control (Appendix D, ND-100 functional description)
  • 3044 ECC disk controller SMD data (Appendix D, ND-100 functional description)
  • 3090 ND-110 CPU old version[21]
  • 3094 Ethernet interface II[22]
  • 3095 ND-110 CPU version 2[21]
  • 3097 4 MByte memory board[22]
  • 3101 PIOC (Appendix D, ND-100 functional description)
  • 3102 Ethernet I Master (Chapter 3.4, Norsk Data Document ND–12.055.1 Ethernet II Controller )
  • 3102 ND-120 cpu[23]
  • 3104 Memory management II (Appendix D, ND-100 functional description)
  • 3105 8-telex interface (Appendix D, ND-100 functional description)
  • 3106 Floppy and streamer controller (Appendix D, ND-100 functional description)
  • 3107 8-terminal interface (Appendix D, ND-100 functional description)
  • 3108 PIOC expanded (Appendix D, ND-100 functional description)
  • 3109 MPM Line Driver[24]
  • 3110 CTI (Colour-Term Interface)[25]
  • 3111 8-terminal interface with buffer (Appendix D, ND-100 functional description)
  • 3112 8" + 5 1/4" FL+STR[22]
  • 3114 Plotter/printer DMA interface (Appendix D, ND-100 functional description)
  • 3201 ND-100 Floppy and SCSI controller, single-ended[26][27]
  • 3202 ND-120CX[22] or ND-125/CX[28]
  • 3204 ND-100 Floppy and SCSI controller, single-ended+differential[26]
  • 3206 SCSI/Floppy[22]
  • 3207 SCSI/Floppy
  • 3401 ND-Butterfly workstation ND-110 CPU
  • 3402 ND-Butterfly workstation memory and ISA interface
  • 3404 ND-Butterfly workstation PROM card

ND-500 Series Boards

(Main article ND-500 boards)

This is a list of boards used in the ND-500/5000 series computers based on the print number on the circuit board.

ND-5000 Series Boards

(Main article ND-5000 boards)

This is a list of boards used in the ND-5000 series computers based on the print number on the circuit board.

Mass storage units

This is the beginning of a list of hard disks, floppy disks and other mass storage units used by Norsk Data. Most units is just re-branded units from other manufacturers

Other hardware

  • ND11-671 Digitronics 2540 paper tape reader
  • ND13-310 Facit 4070 Paper tape punch
  • ND206 DEC LA 36 DECwriter printer[30]
  • ND218 Graphics Colour Plotter[31] - Hewlett Packard 7475 plotter
  • ND224 Tandberg TDV-2115 terminal
  • ND230S Texas Instruments OMNI-825 printer terminal
  • ND242S Tandberg TDV-2215 terminal
  • ND246 NOTIS Terminal[32]
  • ND248 Facit 4420 [33]
  • ND319 TWIST Terminal[34] - Facit Twist terminal
  • ND400 Documation M200 punched card reader
  • ND408 Phillips GP 300L with tractor feed [35]
  • ND410 Phillips GP 300L with double magazine sheet feeder [36]
  • ND102301 Texas Instruments Omni-820 printer terminal
  • ND110002 Tandberg TDV-2200S
  • ND110215 Nokia VDU301, also known as NOTIS VDU

References and sources

  1. picture at www.norsk-data.no
  2. https://en.wikipedia.org/wiki/History_of_Norsk_Data#Internationalization
  3. SCANNET by Björn Grönlund
  4. SERVICE HANDBOOK Vol 1
  5. Norsk Data Document ND–30.031 ND-100 COMPACT OPERATOR GUIDE
  6. PRODUCT NEWS November 1987
  7. ND-110 Satellite Series product description
  8. 8.0 8.1 8.2 8.3 Norsk Data Document ND–05.009 NORD-500 REFERENCE MANUAL
  9. 9.0 9.1 9.2 9.3 ND-05.009.3 ND-500 Reference Manual Jun87
  10. ND-505CX-A1-EN sale brochure on Sintran.com
  11. 11.0 11.1 11.2 11.3 11.4 11.5 11.6 Whetstone Benchmark History and Results
  12. Picture of the production hall at Skullerud.
  13. 13.0 13.1 springerlink.com:Computer algebra in Norway
  14. Norsk Data Document ND–30.071 ND-5000 Series User Guide
  15. Norsk Data Document ND–40.012 Information Pamphlet for Norsk Data Customers
  16. Norsk Data Document ND–30.116.1 NO [[Documentation list#Unknown|]]
  17. Norsk Data Document ND–05.004.01 NORD-50 CPU HARDWARE MANUAL I
  18. ND–30.008.3 EN ND-100 Hardware Maintenance , page 57
  19. ND–30.008.3 EN ND-100 Hardware Maintenance , page 57
  20. Norsk Data Document ND–06.026 ND-110 Functional Description page 123
  21. 21.0 21.1 Norsk Data Document ND–06.026 ND-110 Functional Description
  22. 22.0 22.1 22.2 22.3 22.4 NODAF list of spare parts
  23. ND–30.008.3 EN ND-100 Hardware Maintenance , page 57
  24. ND–30.008.3 EN ND-100 Hardware Maintenance , page 57
  25. ND–30.008.3 EN ND-100 Hardware Maintenance , page 57
  26. 26.0 26.1 Norsk Data Document ND–12.048 ND-100 SCSI Reference Guide
  27. Norsk Data Document ND–830102 ND-5000 ES Model C Hardware Maintenance Manual
  28. http://sintran.com/sintran/hardware/hw-nd-100.html
  29. http://classic.technology/norsk-data-computer-systems-305355-floppy-disk/ link to brochure found on the net
  30. Unit in the collection of Norsk vegmuseum
  31. http://sintran.com/sintran/library/libpdpi/ND-218-A1-EN.pdf
  32. http://sintran.com/sintran/library/libpdpi/ND-246-A1-EN.pdf
  33. ND-NYTT 1982-4
  34. http://sintran.com/sintran/library/libpdpi/ND-319-A1-EN.pdf
  35. ND-NYTT 1982-4
  36. ND-NYTT 1982-4