Software list

From NDWiki
Revision as of 20:19, 30 June 2020 by Tingo (talk | contribs) (→‎Software from Norsk Data AS: add missing links for ND-10319 to ND-10758)
Jump to navigation Jump to search

This is a compilation of known software for the Norsk Data computers. It contains both programs released by Norsk Data AS and third part programmers. Links to online resources and references to where copies could be found should also be included.

The Software lab at 11th floor in Økern Business Center, 1975

Software from Norsk Data AS

(Main article : List of software products)

List of external images

There are a lot of floppy images at Datormuseum.se For a detailed description use the link above.

... and many more

List of test programs we have access to

  • 100-ERRCOR-2339B.BPUN 18K
  • CACHE-2063D.BPUN 38K
  • CONFIGURATIO-C08.BPUN 46K
  • DIMS-1453G.BPUN 17K
  • DISC-TEMA-H33.BPUN 72K
  • DSERV-1395A.BPUN 3.3K
  • ECCTEST-2224B.BPUN 14K
  • FL-LOOPS-1996A.BPUN 1.1K
  • FLOPP-FORM-1990B.BPUN 5.6K
  • FLOPPY-FUNCT-H00.BPUN 7.0K
  • FLOPPY-RAN-1988B.BPUN 9.3K
  • FLOPPY-STREA-B00.BPUN 49K
  • HDLC-MEGALIN-C00.BPUN 30K
  • INSTRUCTION-B.BPUN 45K
  • LP-TEST-D01.BPUN 19K
  • MEMORY-C03.BPUN 35K
  • MOVER-1863C.BPUN 3.5K
  • MULTI-1820P.BPUN 22K
  • PAGING-B.BPUN 25K
  • PARAL-BYTE-1942C.BPUN 6.1K
  • PASCAN-2226A.BPUN 12K
  • PFAIL-1355G.BPUN 2.9K
  • RTC-12-1902B.BPUN 2.3K
  • SMALL-RAND-2448A.BPUN 16K
  • STC-RUNNER-2410B.BPUN 24K
  • STC-TEST-2411E.BPUN 30K
  • SUPER-RAND-F00.BPUN 13K
  • SYNC-MODEM-A.BPUN 22K
  • TANB-MAG-1559H.BPUN 8.3K
  • TECOD-1451E.BPUN 7.0K
  • TERMINAL-ASY-E00.BPUN 32K
  • TET2200-A.BPUN 26K


These programs have been stripped for easy loading as binary only by the nd100emu ND100 emulator project, the start address is in the name.

  • FL-LOOPS-1996A.BPUN.start00000.bin 608
  • INSTRUCTION-B.BPUN.start00000.bin 45K
  • MEMORY-C03.BPUN.start00000.bin 34K

Software mentioned in other sources

CAT[11] Common Abstract Tree Language. R. Voeller & Uwe Schmidt, U Kiel, Germany 1983. Universal intermediate language, used by Norsk Data in their family of compilers. "A Multi-Language Compiler System with Automatically Generated Codegenerators, U. Schmidt et al, SIGPLAN Notices 19(6):202-2121 (June 1984).

NODAL[11] Interpreted language implemented on Norsk Data's NORD-10 computers. Used by CERN and DESY high energy physics labs to control their accelerator hardware, PADAC and SEDAC. Included trackball input, graphics.

GETNORD[12] Reading NORD diskettes to a CP/M based microcomputer. GETNORD is a member of a set of two programs used for transfer of files between a minicomputer NORD and a CP/M based microcomputer. The programs are particularly well suited for transfer of all sorts of text files, written in international ASCII (or, national adapted ASCII versions). GETNORD runs on a CP/M based microcomputer and will perform reading NORD diskettes, with their 512 bytes sectors and their special directory format. The micro must be equipped with at least one normal 8 inch diskette drive, and its disk controller must be able to take 512 bytes sectors, single density. The companion program is GETCPM, a program running on NORD and able to read diskettes written by a CP/M based microcomputer. The two programs work quite independently, however, and they may be obtained individually. Vendor: Odd Pettersen, Hoemshøgda, 7000 Trondheim, Norway.

Software from third part

  • 5 cm of program listings. (Forth + other)

References and sources

  1. 1.0 1.1 1.2 Norsk Data Document ND–30.005 TEST PROGRAM DESCRIPTIONS
  2. Norsk Data Document ND–30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER
  3. 3.0 3.1 Norsk Data Document ND–30.025 COSMOS OPERATORS GUIDE
  4. Norsk Data Document ND–30.033 COSMOS X.21 OPTION OPERATOR GUIDE
  5. 5.0 5.1 ND–60.189 ND/PC-LINK USER MANUAL
  6. Norsk Data Document ND–30.034 COSMOS X.25 OPTION OPERATOR GUIDE
  7. 7.0 7.1 Norsk Data Document ND–30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE
  8. Norsk Data Document ND–60.252 THE SPRINT USER GUIDE
  9. Det norske datafyrtårnet
  10. Norsk Data Document ND–30.031 ND-100 COMPACT OPERATOR GUIDE
  11. 11.0 11.1 Free On-line Dictionary of Computing
  12. NOCUS Software July 1983, page 201