Documentation list-Mixed hardware software

From NDWiki
Revision as of 10:02, 25 May 2020 by Tingo (talk | contribs) (→‎ND-30.003 SINTRAN III System Supervisor: ND-30.003.06A scanned, OCRed, available)
Jump to navigation Jump to search

This is a compilation of documentation about software mentioned in the Norsk Data Documentation Catalogue. Links to online resources and references to where copies of the documentation recide should also be included. Known documentation locations is in the library list.

Documentation List

20 : Internal System Documentation

ND-20.004 UE-Library Reference Manual

This manual describes the UE-LIBRARY (ND-210601) and UE-ERRORS (ND-210178) version C. The library is used to convert error codes to standard text to create consistent error messages for the user.

50 Pages.

(Reference from the Sintran.com site)

Availability :

ND-820026 DOMINO and NUCLEUS Software Guide

This manual describes DOMINO and NUCLEUS. It is aimed at the maintenance personnel and system developers.

304 Pages.

(Reference from the Sintran.com site)

Availability :

ND-20.034 ND-Specific Programming & Advanced PLANC

This manual contains general advice on how to make fast, maintainable and reliable programs on existing ND systems, with examples. The examples are written in PLANC, which is ND's internal development language and which is equipped with features that are conducive to good and efficient programming.

102 pages

Availability :

ND-820059 SINTRAN III/VSX, Fatal Error Routine Addresses

This manual lists the addresses where the ERRFATAL routine is called from SINTRAN III/VSX version L and M. The manual is intended for internal use only, aimed at service personnel.

28 Pages.

(Reference from the Sintran.com site)

Availability :

30 : Operating, diagnostic, maintenance

ND-30.001 NORD-10/NORD-50 Operator's Guide

This manual describes the NORD-10/S and NORD-50 CPU:s and the NORD-10/S operators panel. The manual is aimed towards operators of the NORD-10/S and NORD-50 systems. It gives a good physical layout of the system, including cabling and component placements.

148 Pages.

(Reference from the Sintran.com site)

Availability :

ND-30.002 Site Preparation and Installation Manual

This is a reference manual describing how to set up a site for Norsk Data computers. It applies to NORD-10/S, NORD-50, ND-100 and ND-500.

36 Pages.

ND-30.003 SINTRAN III System Supervisor

This manual is a guide for system supervisors administering data centers. Written for daily operation of the system. It contains information on how to start various hardware, doing warm start, managing disk space, making backups, managing users, ... It also contains a chapter on loading and using test programs.

Appendix C contains a list of device names. Appendix D contains an example of a disk layout. Appendix E contains the system layout of physical memory. Appendix F and G contains the logical and physical layout of the disk system. Appendix K contains information of how to set the thumbwheel on the ND-100 CPU ALD and for the address and baudrate of 8-terminal interface cards (3013).

Versions :

Version 1 06/78 Original printing
Version 2 01/79 Revised edition, replaced original printing
Version 2 Rev. A 02/80 Revised and added a number of pages
Version 3 05/80 Total revision
Version 4 02/82 Total revision
Version 5 03/83 Total revision
Version 6 07/84 305 pages Total revision for SINTRAN III version I
Version 7 12/86 441 pages Total revision for SINTRAN III version K

Availability :

ND-30.004 NORD-10/S HARDWARE MAINTENANCE MANUAL

Written for field service engineers, this manual covers topics as technical description and physical layout of the CPU, memory and I/O system, hardware maintenance, module substitution, error symptoms, troubleshooting. Hardware covered is the CPU, memory, power system, DMA controllers and character devices.

200 Pages.

Availability :

ND-30.005 TEST PROGRAM DESCRIPTIONS

This manual describes the test programs used on ND-100, NORD-10/S, NORD-10 and NORD-12 computers. The manual consists of three parts. The first part contains a detailed description of the FLOPPY MONITOR and the TEST PROGRAM MONITOR. 15 chapters describes the 15 tests contained on the test floppy 1, ND-10324E, the most commonly used tests. The next part covers the 27 tests contained on the test floppy 2, ND-10325B. The last part covers the tests on the test floppy 3, ND-10326B. The manual is written for maintenance personnel working on ND-100 or NORD-10 systems.

250 Pages.

Versions :

revision 06A

ND-30.005 Test Program Description for ND-100/ND-110

This manual seems to be a reworked version of the ND-30.005 TEST PROGRAM DESCRIPTIONS. It describes the test programs used on ND-100/ND-110 computers. The manual consists of three parts. The first chapter contains a detailed description of the TPE-monitor. Chapter 2-20 describes the test programs and the last chapter describes the utility programs. The manual is written for maintenance personnel working on ND-100 or ND-110 systems.

253 Pages.

Versions :

revision 1 March 1983 Preliminary
revision 2 April 1983
revision 3 March 1987

Availability :

ND-830005 Test Program Description for ND-100/ND-110

This manual is the same as above, but in the new ND numbering system.

Availability :

ND-895079 Test Program Description for ND-100/ND-110 - Addendum

There is a reference to this manual in the PI sheet for ND-210523H. The manual numbers are conflicting: both ND-895079 and ND-899159 are given.

Availability :

ND-899159 Test Program Description for ND-100/ND-110 - Addendum

There is a reference to this manual in the PI sheet for ND-210523H. The manual numbers are conflicting: both ND-895079 and ND-899159 are given.

Availability :

ND-30.006 ND TPS SYSTEM SUPERVISOR'S GUIDE

This manual is a guide for operators and system supervisors of ND TPS.

240 Pages.

ND-30.007 Test Program Description for NORD-50

This manual describes the test programs used with the NORD-50 CPU.

Not yet available on 11/81.

ND-30.008 ND-100 HARDWARE MAINTENANCE MANUAL

This manual covers the ND-100 computer and related peripherals. It is an aid for maintenance and service personnel for troubleshooting. It describes typical configurations, preventive maintenance and fault isolation procedures. It also contains brief instructions for running test programs for various units. The appendix contains cross reference lists for ND-100 cards, list of the latest issued test programs and a description of the backplane bus signals.

200 Pages.

Availability :

ND-30.009 SIBAS II OPERATOR'S MANUAL

This is a practical guide for personnel operatint the SIBAS II Database Management System. It gives recommended ways to carry out various procedures.

88 Pages.

Versions: February 1983.

ND-30.010 NORD-50 HARDWARE MAINTENANCE MANUAL

Written for field service engineers working on NORD-5 systems. This manual covers topics as the racks and operators panel, the NORD-50 monitor, error messages, test program information, memory, expansion memory and the power system. eneral knowledge of NORD-10/S hardware and SINTRAN III are required.

200 Pages.

ND-30.011 SINTRAN IV System Supervisor

This manual is a guide for system supervisors administering data centers under SINTRAN IV.

Not yet available on 11/81.

ND-30.013 TEST MICRO PROGRAM DESCRIPTION FOR ND-500

Written for field service engineers and personnel testing ND-500 CPUs. It describes the test programs used for testing the CPU and the procedure for their implementation.

116 Pages.

ND-30.014 ND-500 HARDWARE MAINTENANCE MANUAL

Written for field service engineers.

Not available at printing time.

ND-30.018 TEST PROGRAM DESCRIPTION - ND-500

This manual describes the ND-500 DESMODUR verification system. It is written in two parts. Part one describes the various tests to verify ND-500 microcode and hardware. Part two gives a description on how to extend with new test programs.

108 Pages.

ND-30.019 Installasjonshåndbok

This is a Norwegian version of ND-30.002.

Not yet avaiable on 11/81.

ND-30.020 ACCESS DBA HÅNDBOK

This is a Norwegian version of the ACCESS DBA Manual, ND-30.022

90 Pages.

ND-30.020 ACCESS DBA ANVÄNDARHANDBOK

This is a Swedish version of the ACCESS DBA Manual, ND-30.022

90 Pages.

ND-30.022 ACCESS DBA MANUAL

This is the reference manual for Data Base Administrator for an ACCESS system.

90 Pages.

ND-30.024 SATELLITE INSTALLATION AND OPERATION GUIDE

ND 100 Satellite

This manual replaces an earlier version, ND-30.024 ND SATELLITE SYSTEM. It guides in the steps from unpacking to using the machine. It describes installation, connecting terminals and printers, loading the operation system, maintenancy and backup. It is written for the local supervisor of the system.

70 Pages.

Availability:

ND-30.025 COSMOS OPERATORS GUIDE

This manual replaces an earlier version, ND-30.025 COSMOS System Supervisor. It contains a guide to install and operate the network facilities of COSMOS Basic Module (ND 10374) and IS XMSG (ND 10373). Written for system and network supervisors.

100 Pages.

Versions :

  • 2 : Known as ND-830025.2 EN

ND-30.026 NORDRIFT - HÅNDBOK FOR DRIFTSOPERATØRER

This is the Norwegian version of the Operator's Guide for TPS-II. It documents the ND 10342 ND Transaction Processing System - TPS-II. Written for operators of TPS-II systems.

110 Pages.

ND-30.029 TEST MICROPROGRAM DESCRIPTIONS FOR ND-500/2

This manual gives a short introduction to ND-500/2 microprograming and usage of available test microprograms. It includes instructions on how to start the ND-50/2 test microprograms. Written for production and service personnel or people wanting to write their own microrogram testing routines.

110 Pages.

ND-30.030 ND TPS-II OPERATOR GUIDE

This manual describes the ND 10342 ND Transaction Processing System - TPS-II. It contains all information needed to run a system based on TPS-II. Written for operators of TPS-II systems. Comes in both English and Norwegian versions.

105 Pages.

ND-30.031 ND-100 COMPACT OPERATOR GUIDE

This is a practical guide for operators of the ND-100 Compact computer. It contains a description of the operator's panel, how to start the computer, how to use the floppy and tape streamer, making backups and how to handle some simple errors.

54 Pages.

Availability :

ND-30.033 COSMOS X.21 OPTION OPERATOR GUIDE

This manual describes the ND-10403 COSMOS X.21 Option. Written for system operators.

60 Pages.

ND-30.034 COSMOS X.25 OPTION OPERATOR GUIDE

This manual describes the ND-10573 COSMOS X.25 Option. It contains two parts, the first gives the procedures for starting up and operating the COSMOS X.25 network system. The second part contains reference information about the functions from the first part and aditional advanced functions. Written for system operators.

110 Pages.

ND-30.038 SNA 3270 TERMINAL EMULATOR OPERATOR GUIDE

This manual describes the ND-10741 SNA Gateway Single Line and ND-10742 SNA Terminal Emulator. It contains an introduction to the ND SNA Emulator, how it is implemented and started, the operation of the system, differences between the ND 246 NOTIS keyboard and the IBM 3270 keyboard. Written for operators and other personnel using the ND 246 NOTIS terminal.

50 Pages.

ND-30.040 TELEFIX REFERENCE MANUAL

This manual describes TELEFIX, the remote diagnostic tool used for maintenance of ND hardware and software. It describes the installation, what hardware supports it and how to use it.

139 Pages.

ND-30.041 ND-100 SATELLITE OPERATOR GUIDE

This is a practical guide for people using or supervise the ND-100 Satellite. It covers topics as how to handle the operators panel, handling of floppy disks and the streamer, making backups and similar tasks.

43 Pages.

Availability :

ND-30.042 TRUE OPERATOR GUIDE

This manual describes procedures handling the TRUE system. Written for operators and supervisors.

78 Pages.

ND-30.047 ND COLOURED BOOKS OPERATOR GUIDE

This manual describes installation and handling of the ND Coloured Books data communication product

90 Pages.

ND-30.049 SINTRAN III TUNING GUIDE

This manual describes how to tune a SINTRAN III installation. It is written for system supervisors, system programmers and users with a special interest in tuning.

65 Pages.

Availability:

ND-30.051 FTX OPERATOR MANUAL

This manual describes the fault tolerant system, FTX.

110 Pages.

ND-30.053 SINTRAN III HOW TO ORDER IT

This manual describes how to fill in the SINTRAN III ORDER FORM. This version covers the J version but could be of help for other versions too.

35 Pages.

ND-30.055 NDIX operator guide

Referenced in ND-210905 product description.

Availability:

ND-30.056 Butterfly Teamstation Installation Guide

(Reference from the Sintran.com site)

ND-30.057 Butterfly Teamstation Supervisor Guide

(Reference from the Sintran.com site)

ND-30.059 NOTIS-DS SUPERVISOR GUIDE

This manual describes installation, maintenance and operation of NOTIS-DS. Written for the advance user with system supervisor responsibility.

34 Pages.

ND-830061 Operator Environment User Guide

(Reference from the Sintran.com site)

ND-830062 NOTIS-ID Supervisor Guide

ND-830070 Disk Mirroring Operator Guide

(Reference from the Sintran.com site)

ND-30.071 ND-5000 Series User Guide

This is a small booklet written for the complete novice to ND computers. It covers for example how to use floppys, log in or taking backup.

23 Pages.

Versions ND-30.071.1 EN : 1st edition June 1987

ND-830072 Dialogue Operations

(Reference from the Sintran.com site)

ND-30.073 NORD 5000 Macrotest Description

(Reference from the Sintran.com site)

ND–30.076 BUTTERFLY WORKSTATION OWS SUPERVISOR GUIDE

Availability : A copy is located in the Teg library.

ND-30.081 ND-100 TRACER DESCRIPTION USER GUIDE

This manual describes the ND-100 Tracer debugging tool. It is based on two products, the ND-100 Tracer 3092 and the ND-100 Tracer Adapter 3116. The manual is aimed towards service personnel.

60 Pages.

(Reference from the Sintran.com site)

Availability :

ND-830093 OWS Installation Guide

ND-30.094 OWS System Reference Guide

Availability : A copy is located in the Teg library

ND-830101 OEM User Guide

Versions :

  • 1 :

Availability:

ND-830102 ND-5000 ES Model C Hardware Maint. Manual

This manual gives a physical description of the ND-5000 ES model C The manual is aimed towards service personnel.

66 Pages.

(Reference from the Sintran.com site)

Availability :

ND-830103 ND-5000 ES Model S Hardware Maintenance

(Reference from the Sintran.com site)

ND-830107 OpenLAN Network Supervisor Guide

This manual describes the OpenLAN software product. Both server, access module and SIBAS backend is described.

Availability :

  • A copy is located in the Teg library
  • Revision 3 in Sintran.com library, in pdf format.

ND-830108 OpenLAN Reference Guide for OWS Adapter Card

This manual covers the installation of an OpenLAN Adapter card in a ND Workstation model 12, 55 or 85. It covers both hard and software installation as well as some troubleshooting.

43 pages.

Availability : A copy is located in the Teg library also in pdf format.

ND-830120 OWS-85 Installation Guide

(Reference from the Sintran.com site)

ND-830123 OpenLAN NCS Installation and Operation Guide

ND-830124 OpenLAN Network Management and Operation Guide

ND-830141 SINTRAN NFS Support Supervisor Guide

This manual describes the SINTRAN NFS Support product ND-211299. It is written for the system supervisor and describes how NFS is implemented in SINTRAN and how file names are translated. SINTRAN NFS Support is a product which makes it possible to include SINTRAN computers in a multi-machine environment based on a Network File System (NFS).

28 Pages.

(Reference from the Sintran.com site)

Availability :

ND-830147 ND EServer System Administrator Guide

40 : Miscellaneous

ND-40.004 Documentation Catalogue

This is a list of how ND documentation is connected, what different manuals there is and a short description of the content. In the end there is a price list and instructions on how to order manuals.

Versions :

ND-40.004.1 EN : 05/81
ND-40.004.2 EN : 11/81 63 pages.
ND-40.004.3 EN : 06/82
ND-40.004.4 EN : 02/83
ND-40.004.5 EN : 08/83
ND-40.004.6 EN : 10/84 90 pages.
ND-40.004.7 EN : 01/85 128 pages.

Availability :

ND-40.005 NORSK DATA GLOSSARY

This is a glossary over terms used in ND manuals. ND abbreviations are also listed. Some common computer terms are also explained.

Not available at printing time.

ND-40.012 Information Pamphlet for Norsk Data Customers

This is a small booklet giving an overview of what's shipped with a ND computer, how to order products, software and service and a short introduction to NOCUS.

18 Pages.

Versions ND-40.012.1 EN : 1st edition November 1987


50 : Hardware / software system description

No such manuals known.


References and sources