IOT

From NDWiki
Revision as of 16:30, 4 August 2010 by TArntsen (talk | contribs) (Fix link: SINTRAN-III ->SINTRAN III)
Jump to navigation Jump to search
IOT
Description Perform monitor call
Format IOT SKA <number>
Code 161 0008
Affected Various registers, depending on <number>
Type User
Architecture NORD-1

IOT, or IOT SKA is an undocumented instruction used by very old applications like NPL. Old ND system applications tend to keep old code even when updated. This instruction is probably from NORD-1.

The BRF EDITOR command LIST-BRF is aware of 161.xxx instructions and lists them as IOT SKA. The BRF Linker LIST-BRF-CODE command will only list the octal value, and no mnemonic.

The instruction pre-dates SINTRAN-III and the NORD-10/N1xx CPUs, but applications using this instruction, within a certain range of <number> values, are still able to execute on the newer systems due to a trick explained below. This allows applications like NPL to work.

Implementation details

The instruction does not exist in the NORD-10/ND-1x0 CPUs, but it will trigger a Privileged Instruction exception in SINTRAN-III (bit 6 in the Internal Interrupt Code register [1]). The snippet of SINTRAN-III code which handles the exception looks as follows: [2]

072404   IIC06: IF ACTLV=ALEVL THEN                       % PRIVILIGED INSTRUCTION
072410             RTREF.ACTPRI/\74000 SHZ -4+"NMPIT+LV14B+ERNG2"% SET USERS NORMAL PIT AS ALT. PIT
072415             X:=PERR; *TRR PCR
072417             X.SN1=:D                               % D= THE ILL.INSTR.
072421             "NMPIT+ADPIT+LV14B+ERNG2"; *TRR PCR    % RESET PCR
072423             IF 177600/\D=161000 THEN T:=177/\D; GO FAR MONCALL FI % IF 161XXX THEN MONCALL
072433             IBITNO; T:=PERR; CALL 9ERR(#24)        % GIVE ERROR MESSAGE
072437             GO FAR ABOR                            % TERMINATE CURRENT RUNNING PROGRAM
072440           FI; GO FAR TDTLEV                        % MAY BE ILL.INSTRUCTION ON ILLEGAL LEVEL

The NPL code "IF 177600/\D=161000 THEN T:=177/\D; GO FAR MONCALL FI" translates to the following pseudocode:

if instruction is in the 161000 (octal) range, and <number> is in the range 0x00-0x7f, then
  handle as monitor call (<number>)
else
  handle as any other illegal instruction, abort program
endif

The interrupt handler detects if the instruction is an 161000 instruction, and, if so, handles it as a MON instruction (1530008), i.e. a monitor call (within the allowed range for <number>), instead of aborting the program. The instruction is thus an old version of the MON instruction, and the old calls map one-to-one to the SINTRAN-III functions as long as they are below 128 decimal (i.e. up to and including 'MON 177').

'IOT SKA', as used by the BRF EDITOR, may possibly stand for 'IOT Systemkall' which translates to 'IOT System Call' from Norwegian.

References

  1. Norsk Data Document ND–06.014.02 ND-100 REFERENCE MANUAL page 2-17
  2. SIN-L STD A listing part two, March 1989