View source for ND-100/CX Compact 3392.1669/Sintran

This page documents testing of SINTRAN III on the machine ND-100/CX Compact ([[ND-100/CX Compact 3392.1669|3392.1669]]).

== Version ==
This machine has '''SINTRAN III - VSX / 500 K''' installed.

== History ==
; 2011-12-14 : various info (transcribed)
Users on the machine
 @li-us,,,
 USER 0: PACK-ONE:SYSTEM
 USER 1: PACK-ONE:FLOPPY-USER
 USER 2: PACK-ONE:UTILITY
 USER 3: PACK-ONE:BPUN-FILES
 USER 4: PACK-ONE:SCRATCH
 USER 5: PACK-ONE:RT
 USER 6: PACK-ONE:COSMOS-BASIC
 USER 7: PACK-ONE:TCP-IP
 USER 8: PACK-ONE:COMPACT-101
 USER 9: PACK-ONE:STUDS
Interesting that RT is user 5. FLOPPY-USER has no space in main directory.

initial commands
 @li-ini-com,,
 ENTER-DIRECTORY,,D-74MB-1,0
 S-E-D 1
 CONNECT SYS-OUT-1 105 R
 CLOSE 105
 BATCH
 APPEND-BATCH 1 LOAD-FILE:SYMB SYS-OUT-1
end of initial commands.

Files on the machine (not a complete listing), just the interesting ones.

files on user SYSTEM:
 FMAC-1920C:PROG
 DMAC-1915F:PROG
 S3-CONFIG:PROG
 RESERVE-SYSTEM:MODE
 RESERVE-SYSTEM:BATC
 SLASK:SYMB
 AIP-HOSTS
 AIP-SERVICES
 AIP-NETWORK
 AIP-PROTOCOL
 FTP-SERVER-B05:PROG
 TETRIS:SYMB
 FTN-2090I:PROG
 GREP:FORT
 LOAD-FILE:SYMB
 HENT-FILE:SYMB
user UTILITY has the usual files
 BACKUP-H06:PROG
 BACKUP-SERV-H04:PROG
 BACKUP-LOAD:MODE
 DMA-SERVER-A00:BRF
 DMA-LOAD-A02:MODE
 DDBTABLES-C-B:VTM
 DDBTABLES-D-E02:VTM
 DDBTABLES-E08:VTM
 DDBTABLES-G03:VTM
 XMSG-IN-L03:PROG
 XMSG-O1-L03:XCOM
 XMSG-STARTEX-L03:MODE
 XMSG-STARTEX-L03:BATC
 XMSG-SYSTABS-L03:SYMB
 XMSG-POFTABS-L03:SYMB
 XMSG-VALUES-L:SYMB
 XMSG-PL-VALUES-L:INCL
 XMSG-LIBRARY-L03:BRF
 XMSG-HDLC-TEST-L:PROG
 XMSG-FIDO-L03:PROG
 XMSG-COMMAND-L03:PROG
 XMSG-KERNEL-L03:PROG
 XMSG-XROUT-L03:BPUN
 XMSG-SYMBOL-L03:SYMB
 XMSG-LOAD-L03:MODE
 XMSG-INIT-L:MODE
 XMSG-SYSDEF-L:SYMB
 XMSG-START-L:MODE
files on user BPUN-FILES
 PED-ENG-J
 NPL-1896D
 FTN-2090H
 MAC-1415C
 NRL-1935I
 FTN-2090I
user SCRATCH has scratch files, nothing else

files on user RT
 SLASK:SYMB
 THEO-LIST:SYMB
files on user COSMOS-BASIC - appears to be standard files for COSMOS-BASIC
 COS-HENT-E04:MODE
 COS-START-E04:MODE
 COS-FILE-TRA-E02:PROG
 COS-XFTRA-E02:PROG
 COS-XFTRA-E02:MODE
 COS-CONN-TO-E02:PROG
 COS-COSP-VSX-E02:BPUN
 COS-COSP-VSX-E02:MODE
 COS-SPOO-SER-E02:PROG
 COS-DEF-PRIN-E02:MODE
 COS-FAU-VSX-E03:BPUN
 COS-FAU-VSX-E03:MODE
 COS-FSART-E02:BPUN
 COS-FSART-E02:MODE
 COS-FA-SERV-E04:PROG
 COS-FA-SERV-E04:MODE
 COS-FS-ADMIN-E02:PROG
files on user TCP-IP
 TCP-IP-LO-1-B05:PROG
 TCP-SERV-BO-B05:PROG
 TELNET-SERV-B05:PROG
 PO-STOP-B05:PROG
 PO-PWRFAIL-B05:PROG
 FTPRT-B05:PROG
 TCP-START-B05:MODE
 FTP-CLIENT-B05:PROG
 TELNET-CLIEN-B05:PROG
files on user COMPACT-101 - source code and compile mode files for the simulator (much FORTRAN code here). Examples:
 FORSMARK-LOAD101:SYMB
 STUDSVIK-LOAD101:SYMB
 LOAD101-FORSMARK:SYMB
 LOAD101-STUDSVIK:SYMB
files on users STUDS
 STUDS2-SCANFIL:DATA
 STUD:DATA
That's it.

; 2011-11-13 : '''testing the floppy drive'''. The machine has to be started by pressing the START button. The panel clock is incorrect, so I have to set the clock manually:
 @updat 06,14,13,11,2000
 @datcl
  14.06.04   13 NOVEMBER 2000
Let's try to format a floppy:
 @dev-fun fl-1 s-f-f 17
(device-function, floppy-1, set-floppy-format 17B)
 @dev-fun fl-1 f-f
(device-function, floppy-1, format-floppy)
No error messages. Let's try to enter the directory
 @ent-dir,,f-d-1,0
 ILLEGAL FLOPPY FORMAT
(enter-directory, floppy-device-1, unit 0)
Ok, perhaps I need to create a directory on it first. Let's start again:
 @dev-fun fl-1 r-f
 FORMAT (OCT): 13B
(read format)
 @dev-fun fl-1 f-f
 @dev-fun fl-1 read-status
 STATUS: 10B
 @cr-dir,test2,f-d-1,0
 ILLEGAL FLOPPY FORMAT
 @dev-fun-fl-1 read-status
 STATUS: 10B
Other info:
 @dev-fun fl-1 f-f
 FORMATTING ERROR
 @dev-fun fl-1 read-status
 STATUS: 111030B
Doesn't look like the floppy is ok.

; 2011-11-10
: '''setting the clock''': trying to set the clock to a year after 2000 gives an error (the K version of Sintran III is too old for this), so this is what we will have to live with
 @updat 31,23,10,11,2000
 @datcl
  23.31.02   10 NOVEMBER 2000
: '''first boot''' (transcribed)
 BATCH NUMBER =  1
 13.14.12     15 SEPTEMBER 1987
 SINTRAN III - VSX / 500 K  ******** VÄLKOMMEN TILL DEMO SIMULATORN ********
 STANDARD CONFIGURATION: C
 GENERATION (WORK MODE NO.):  312B
 REVISION (PATCH FILE NO.): 11400B
 CPU TYPE: 102
 CPU NUMBER: 3608
 GENERATED: 13.14.00     15 SEPTEMBER 1987
 SINTRAN III RUNNING - 
 
 PAGES FOR SWAPPING: 1357B
 
 ND-100 PANEL CLOCK INCORRECT 
 
 1987.09.15  13:14:21 ** XROUT: xmsg  version L03 (87.11.26) started **
 
 *** 13.14.40 TERMINAL 670:
 ***INFORMATIONS SIMULATORN ÄR NU FÄRDIG ATT ANVÄNDA ***
Pressing ENTER lets me log in as user SYSTEM (no password), and the system writes:
 OK
 SIM-INFO..@
Nice.