LOAD-BINARY

From NDWiki
Revision as of 10:34, 12 February 2019 by TArntsen (Talk | contribs) (Add link)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
@LOAD-BINARY <file name>

Load a program in BPUN format from a file to the user's memory and start executing it.

<file name> 
(default type = BPUN) Program file name.

Rules:

  1. Permitted for all users.
  2. The file must start with a bootstrap loader.
  3. The addresses used for loading and start are found in the program file, written by a )BPUN command (@MAC, @MACF, etc.).
  4. When loading, a checksum is calculated and compared to the one in the program file. If they do not match, no execution is attempted and an error message is output.

Example:

@LOAD-BINARY PROG-1

The program in the file PROG-1:BPUN is loaded and executed.

Related commands

@PLACE-BINARY

@RECOVER

@REMOTE-LOAD (command)

References

Norsk Data Document ND–60.050.06 SINTRAN III USERS GUIDE section 3.3.5

Norsk Data Document ND–60.128.01 SINTRAN III REFERENCE MANUAL (printed June 1980), page 1-98

Norsk Data Document ND–60.174.Q01 SINTRAN III QUICK REFERENCE CARD