ND-210628F
SINTRAN III VSE/VSX Utility programs.
 |
This article is a stub. You can improve NDWiki by expanding it. |
Description
Programs to handle mass storage devices offline.
Prerequisites
The following are required in order to use this product.
- computer
- ND-100 / ND-110 / ND-Butterfly OWS model 110
Programs
File name Type Containing COP-VERIFY-J01 BPUN Page copying between mass storage devices. DIR-BACKUP-D01 BPUN Backup Disc/Streamer. FILSYS-INV-Q04 BPUN Checks/updates directory. FLOPPY-TO-WIN-E00 BPUN Floppy to Disc copying. FLOPPY-MON-H01 BPUN Loads BPUN programs stand alone. MCOPY-TANB-P03 BPUN Tape to/from Disk copying. WINCH-TO-FLO-E00 BPUN Disc to Floppy copying.
Documentation
- SINTRAN III System Supervisor - Norsk Data Document ND–30.003.5 EN SINTRAN III System Supervisor
- Test program description for ND-100/110 - Norsk Data Document ND–30.005.3 EN TEST PROGRAM DESCRIPTIONS
- ND-100 Compact Operator Guide - Norsk Data Document ND–30.031.2 EN ND-100 COMPACT OPERATOR GUIDE
- BACKUP User Guide - Norsk Data Document ND–60.250.1 EN BACKUP USER GUIDE
PD- or PI-sheet:
Installation
ND-100 / ND-110
When loading from a Single Side/Single Density diskette, choose the one with the wanted utility.
Insert the floppy in floppy device 1, unit 0.
The computer must be in STOP mode. Press MACL (or type MACL in OPCOM) and type "1560&" on console.
ND-butterfly OWS model 110 & model 110 teamstation
Press the <SYS> key and select MS-DOS from the menu by moving the inverse field to MS-DOS by pressing the ARROW keys. Press RETURN to preform the selection.
When you have entered MS-DOS, move from MS-DOS to the SINTRAN console by typing:
C:\>SUPV
Give the system password and select the CONSOLE option. Press <ALT>+<F2> simultaneously to stop SINTRAN III. If the AUTOflag is set, press <ALT>+<F4> to reset it. and then press <ALT>+<F1> simultaneously to do a master clear of the hardware
Place the SINTRAN III VSE/VSX Utility programs diskette in FLOPPY-DISC-1, UNIT 0: (= FLOPPY A)
Type without giving carriage return: 1560$
The Floppy-Monitor will come up with a '*' as the prompt string. The it is possible to list the programs on the diskette by typing:
*LIST-FILE
To load a program, just type the program name or:
*LOAD-FILE <program name>
The program will then start.
Date
Date of release, production, revision.
Date: 1987.05.21
Media
Labels
Images
Images (made with dd) of 5.25 inch floppies.
- 210628F01-XX-01D.image.gz Note: this image is small, and probably not usable, due to a read error on this floppy. See the Errors section.