Search results
Jump to navigation
Jump to search
Page title matches
- ==Reference== 30.041.1 EN , from Terminology Category:Glossary ...479 bytes (84 words) - 17:24, 23 June 2016
- == ND-100 Boot Loaders == The ND-100 has bootstrap loaders for mass storage and character oriented devices. There are two load formats. ...5 KB (766 words) - 13:03, 21 April 2019
- @RTOPEN-FILE , Open a file for RT programs. ; : (default type = SYMB) file name. ; : specifies the intended access-mode, only the following ...1 KB (177 words) - 11:42, 17 August 2017
- @CREATE-FILE will create a contiguous file with the given number of 1K word pages (1024 decimal words, or 2048 bytes), or an indexed file with ...1 KB (165 words) - 20:02, 16 July 2013
- @ALLOCATE-FILE , , Create and allocate a continuous file. The file is created on a specified area of a disk. The page size is always 1K words ...1 KB (169 words) - 13:58, 14 November 2017
- @DELETE-FILE Delete a file and release the pages used. if a version number is specified, only that version is deleted. Otherwise, all versions ...887 bytes (126 words) - 22:29, 16 July 2013
- @EXPAND-FILE , Expand the length of a contiguous file. Contiguous files are not allowed to grow dynamically larger than the allocated number of ...820 bytes (112 words) - 21:38, 3 January 2014
- @FILE-STATISTICS gives a list of all files that matches , and in addition to the name also the type of file (indexed or continuous), access modes ...2 KB (202 words) - 08:46, 6 March 2019
- @COPY-FILE , Copies data between peripheral units and files. Copies data from a source to a destination file. The file is copied page by page ...2 KB (259 words) - 21:04, 16 July 2013
- @OPEN-FILE [:[;]], This command is used to make a file available for access, and returns the logical unit number to be used for accessing the file. ...3 KB (450 words) - 15:20, 2 October 2017
- @CONNECT-FILE This command may be used to open a mass storage file with a predefined file number. Otherwise it acts like the OPEN command. ...1 KB (172 words) - 17:55, 22 August 2012
- @CLOSE-FILE This command may be used for closing previously opened files. The file with the specified will be closed. If is -2, all files for ...420 bytes (60 words) - 18:39, 22 August 2012
- @RESERVE-FILE Reserve a peripheral file for the exclusive use of the terminal user. This command is used to reserve a file or peripheral device ...881 bytes (114 words) - 13:17, 14 August 2017
- @RELEASE-FILE Permit a peripheral file to be used from other terminals. This command is used to release a previously reserved file from the current ...764 bytes (95 words) - 21:14, 12 July 2017
- @WHERE-IS-FILE Check whether a file is opened and / or reserved. List the user or RT program opening or reserving the file. ; : file name. and ...938 bytes (125 words) - 14:33, 2 October 2017
- @RENAME-FILE , [], [:] Change file object name and / or type. ; : an existing file. ; : (default = no change) ; : (default = no change) ...783 bytes (111 words) - 14:29, 9 August 2017
- @RTCLOSE-FILE Close a file opened for RT programs. ; : > 0 = close the file with the specified logical device no. -1 or -2 = close all files ...581 bytes (72 words) - 13:08, 15 August 2017
- @RTCONNECT-FILE , , Open a file with a previously defined number. The file will be available for all RT programs. ; : (default type = SYMB) file name. ...1 KB (188 words) - 10:56, 17 August 2017
- File Manager is a program which will help you administer your files. == See also == Related documentation. 60.125 60.179 63.001 == References == ...282 bytes (29 words) - 11:54, 16 October 2017
- @SET-PERIPHERAL-FILE , Associate a file with a logical device number. Peripheral files are supported by the file management system. User SYSTEM ...976 bytes (127 words) - 12:24, 21 August 2017
Page text matches
- @SET-PERMANENT-OPENED Open a file so that it is not closed by @CLOSE -1 or the corresponding monitor call. ; : (octal) file number from @OPEN ...657 bytes (85 words) - 13:07, 29 August 2017
- The ND 106270 is a Tandberg TDC 3309 tape streamer. Another label reads ND 150-001442. == Technical data == == Images == File:Tandberg TDC 3309 top.jpg ...420 bytes (56 words) - 12:05, 6 March 2019
- @RTCLOSE-FILE Close a file opened for RT programs. ; : > 0 = close the file with the specified logical device no. -1 or -2 = close all files ...581 bytes (72 words) - 13:08, 15 August 2017
- @SET-TEMPORARY-FILE Define the contents of a file as temporary. The contents are deleted when the file is closed after it has been accessed for ...746 bytes (104 words) - 13:36, 29 August 2017
- ND13-310 is the product number of the Facit 4070 paper tape punch. == Pictures == File:Facit-4070 1 IMG 20210421 143416619 MP.jpg File:Facit-4070 ...2 KB (261 words) - 15:40, 23 April 2021
- The ND 103161 is a Toshiba 5862A0K floppy drive. Another label says ND 187-3104. == Technical Data == * floppy size: 5.25 inch * track density: 96 tpi ...638 bytes (100 words) - 20:10, 11 July 2016
- @SET-PERIPHERAL-FILE , Associate a file with a logical device number. Peripheral files are supported by the file management system. User SYSTEM ...976 bytes (127 words) - 12:24, 21 August 2017
- @LIST-FILES For each file, list file object number and full name. Gives a list of all files that match the , with the file entry number, full ...725 bytes (95 words) - 20:45, 4 April 2014
- A system file containing the SAVE AREA for the file system and command segments. It is an allocated file of 64 pages starting on page 100 (octal) ...254 bytes (36 words) - 11:18, 21 May 2020
- @DELETE-FILE Delete a file and release the pages used. if a version number is specified, only that version is deleted. Otherwise, all versions ...887 bytes (126 words) - 22:29, 16 July 2013
- @RELEASE-FILE Permit a peripheral file to be used from other terminals. This command is used to release a previously reserved file from the current ...764 bytes (95 words) - 21:14, 12 July 2017
- The file (SYSTEM)LOAD-MODE:MODE is a batch file which will run every time Master-Clear / Load is executed. It must be tailored to suit each system ...391 bytes (64 words) - 16:09, 26 October 2010
- @EXPAND-FILE , Expand the length of a contiguous file. Contiguous files are not allowed to grow dynamically larger than the allocated number of ...820 bytes (112 words) - 21:38, 3 January 2014
- @RENAME-FILE , [], [:] Change file object name and / or type. ; : an existing file. ; : (default = no change) ; : (default = no change) ...783 bytes (111 words) - 14:29, 9 August 2017
- @DUMP-BIT-FILE , , Dump in octal directory bit file on an output file. ; : directory where the bit files is contained ; : see below (decimal ...650 bytes (83 words) - 20:48, 26 September 2013
- @RESERVE-FILE Reserve a peripheral file for the exclusive use of the terminal user. This command is used to reserve a file or peripheral device ...881 bytes (114 words) - 13:17, 14 August 2017
- @DELETE-SPOOLING-FILE , A file is removed from the spooling queue of a spooling device. If it is a spooling file, its pages are released and returned ...1 KB (155 words) - 20:25, 31 July 2013
- @SCRATCH-OPEN , Open a file as a scratch file. ; : (default type = SYMB) file name. ; : specifies the intended access-mode, only the following ...1 KB (181 words) - 12:30, 17 August 2017
- @REMOVE-FROM-SPOOLING-QUEUE , Remove a file from the spooling queue of a spooling device. The contents of the file are retained. ; : spooling device ...859 bytes (108 words) - 11:16, 7 August 2017
- @SET-DEFAULT-FILE-ACCESS , , Change the default file access for the current user. This is the public, friend and owner access to a file when it ...830 bytes (107 words) - 10:46, 21 August 2017