Search results
Jump to navigation
Jump to search
- Adjust internal clock. ; : (decimal) time adjustment as a positive ... #The software clock and calendar are set forward if the adjustment ...931 bytes (126 words) - 12:49, 28 September 2017
- Give new values to the clock and calendar. ; : (default = 0, decimal ... #On NORD-100 the command updates the panel clock, if installed. ...744 bytes (89 words) - 12:52, 27 September 2017
- and other subsystems. It also has the Real time clock and the I/O for the serial console. ==Introduction== ==Switches and indicators== ...2 KB (263 words) - 17:37, 14 January 2018
- A basic time unit is normally 20 milliseconds. The real time clock will give an interrupt every basic time unit, i.e., 50 times per second ...249 bytes (35 words) - 10:42, 21 May 2020
- 163 I/O output and clock, is a card that is used in the NORD-1 CPU. [[Image:NORD-1 card 163-II-c.jpg |300px | thumb | Component side.]] ...870 bytes (124 words) - 06:20, 24 July 2016
- by @ABSET are rescheduled according to the new clock if the clock is adjusted (CLADJ). Example: @ABSET KLOKK,, 10, 13 KLOKK will be put in the ...1 KB (158 words) - 11:03, 5 October 2017
- Print the current setting of clock and date. No parameters. Rules: #Permitted for all users. #The internal time is reset each time the system ...338 bytes (41 words) - 20:38, 16 July 2013
- 3002 is the ND-100 CPU board. It contains the CPU, bus arbitration logic, memory control and other subsystems. It also has the Real time clock ...4 KB (579 words) - 15:21, 14 January 2018
- * One node must be set up as MASTER. This node supplies the OCTObus ... * XCLK - Clock * XDAT - Data * XRFO - Refresh oscillator ...2 KB (348 words) - 09:05, 29 June 2016
- other subsystems, including the Real time clock and the I/O for the serial ... It is used for the nano-sequencer, the CPU-clock, the bus arbiter, the real ...9 KB (1,367 words) - 14:48, 2 June 2023
- any other problem than the real time clock had run out of power. ... * Real time clock needs a new battery * Runs test program INSTRUCTION ...2 KB (315 words) - 19:55, 28 September 2016
- *5:on - normal operation, processor clock enabled *5:off - processor clock disabled (only used for card tester) ...4 KB (690 words) - 15:37, 26 April 2023
- by pressing the START button. The panel clock is incorrect, so I have to ... : setting the clock: trying to set the clock to a year after 2000 ...5 KB (598 words) - 08:38, 4 August 2020
- #If a program is put in the time queue by @SET, clock adjustment (@CLADJ) does not affect waiting time. Example: @SET KLOKK 5,3 The RT program ...1 KB (165 words) - 08:34, 21 August 2017
- short than this, in fractions of a clock. error to tolerate in pulse timing, in fractions of a clock. ...6 KB (876 words) - 16:39, 5 February 2021
- those with no error state like 153 1138 (MON CLOCK), have no skip return. ==== MON handling in SINTRAN-III ==== The instruction causes an internal ...2 KB (374 words) - 13:31, 7 August 2010
- and other subsystems, including the Real time clock and the I/O for the serial console. ==Introduction== This is the "old" ND-110 CPU card. ...2 KB (287 words) - 10:11, 19 March 2023
- It is used for the nano-sequencer, the CPU-clock, the bus arbiter, the real time clock and the console UART. The nano-sequencer is a four bit ...6 KB (903 words) - 11:03, 28 April 2019
- | 1520 || || 322256 || Data Buffer and Clock || (1) |- | 1521 || 1A39 || 322257 || MUL-DIV Arithmetic || |- | 1522 || 1A40 || 322258 || Output ...3 KB (290 words) - 09:59, 12 October 2018
- onboard rtc on the cpu clock. It resides at IOX 10-13 octal, and to add that one we have in the above routine: IO_Handler_Add(8,11,&RTC_IO,NULL); ...3 KB (450 words) - 22:05, 7 June 2016