3107: Difference between revisions

From NDWiki
Jump to navigation Jump to search
(created 3107 page)
 
(added See Also section, and link to 3111)
 
Line 19: Line 19:
==I/O Devices on the card==
==I/O Devices on the card==
none?
none?
==See also==
[[3111]]


==References==
==References==

Latest revision as of 19:08, 14 January 2018

3107 is the 8-terminal interface.

Introduction

What does it do?

Switches and indicators

  • thumbwheel 6, Baud-rate selection, group A
  • thumbwheel 5, Baud-rate selection, group B
  • thumbwheel 4, Terminal group selection, group A
  • thumbwheel 3, Extended address selection, group A
  • thumbwheel 2, Terminal group selection, group B
  • thumbwheel 1, Extended address selection, group B

Extended address selection (TH1 and TH3) have only two valid positions: 0 - normal address range, 1 - extended address range. Extended address range means terminals 65 to 128. These terminals are reached only by using the ND-100 instruction IOXT. In addition there are switches for Current loop / RS-232 selection for each terminal.

Connectors

The A and B connectors are used for I/O, the C connector is used for the ND-100 Bus.

I/O Devices on the card

none?

See also

3111

References