User:Tingo/Documentation

From NDWiki
< User:Tingo
Revision as of 17:39, 20 July 2020 by Tingo (talk | contribs) (→‎Software: added UNI-ASM and MICRO-LINK Users Guide Revision-A October 1980)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a list of the physical documentation I have. If you are looking electronic copies, try the Documentation list or the library. The list is in numerical order within each section.

Quick reference cards

In general, quick reference cards are fold-outs, printed on both sides and with two holes for a binder. They are in A6 format when folded (unless otherwise noted).

  • 1 x ND-06.014.01 ND-100 Instant Instruction Codes
  • 1 x ND-06.015.01 ND-100 Operator's Communication Instruction Survey
  • 3 x ND-60.174.001 (10/1983) SINTRAN III Quick Reference Card - ND–60.174.01 SINTRAN III QUICK REFERENCE CARD
  • 16 x ND-63.016.Q02 (12/1983) NOTIS-WP Oppslagskort for TDV-2200/9 - ND-NOTIS terminal
  • 1 x ND-63.032Q01 (01/1984) NOTIS OPPSLAGSKORT for ikke-NOTIS terminaler (med spesiell tanke på TANDBERG TDV-2115)
  • 6 x ND-99.001.Q01 (05/1984) COSMOS User Card - ND–99.001.Q01 COSMOS USER CARD
  • 8 x ND-99.002.01 (01/1985) COSMOS Operator Card - ND–99.002.01 COSMOS OPERATOR CARD
  • 1 x ND-99.005.02 (12/1984) ND-100 Instant Instruction Codes
  • 6 x ND-99.007.2 NO (08/1986) NOTIS-WP OPPSLAGSKORT for TDV-2200/9 ND-NOTIS terminaler (for NOTIS-WP M-versjon) (A4, double sided)
  • 1 x ND-99.016.02 (12/1984) ND-100 Operator's Communication Instruction Survey - ND–99.016.02 ND-100 OPERATOR'S COMMUNICATION INSTRUCTION SURVEY
  • 10 x ND-99.031.1 NO (08/1986) NOTIS-TF Oppslagskort - ND–99.031.1 NOTIS-TF REFERENCE CARD
  • 1 x ND-99.035.1 NO (01/1986) NOTIS-WP-M På 5 minutter (foldout a bit smaller than A4)
  • 1 x ND-99.055.1 NO (10/1986) NOTIS-IR OPPSLAGSKORT for ND-NOTIS terminaler

Manuals

Hardware

NORD-5, NORD-50, NORD-500 CPUs

NORD-1, NORD-10, NORD-10/S, NORD-100 CPUs

Data storage equipment

I/O Interfaces

Miscellaneous hardware

Mixed

Software

Test and Verification

NOTIS software

Other manuals

This section contains other manuals I have, that are related to ND, but doesn't follow the ND naming standard for documents, or doesn't have a document number at all.

NORD-1

  • 1 x (02/1970) NORD-1 Reference Manual - Complete Instruction Repertoire[3]
  • 1 x (01/1971) Disc system for NORD-1 - Programming Specifications[2]
  • 1 x (06/1968) Teknisk Notat Nr. 1 - "Paging"-system for datamaskinen NORD-1[2]
  • 1 x (04/1970) NORD-1 MODEM INTERFACE - Specification and Operation[6]
  • 1 x (03/1971) NORD-1 MODEM INTERFACE - Hardware[2]
  • 1 x (02/1971) NORD-1 CONNECTORS - I/O Channel System - Data Channel System[6]
  • 1 x (11/1970) NORD-1 Duplex Buffer 170[6]
  • 1 x (09/1969) NORD-1 All Core Monitor - Users Manual[6]
  • 1 x (11/1970) NORD-1 CMI Memory - Backwiring in NORD-4[6]
  • 1 x (05/1972) NORD-1 Hardware Manual - Cambridge Memories - Drawings[2]
  • 1 x (06/1970) Magnetic Tape System for NORD-1 - Preliminary Programming Specifications[2]
  • 1 x () NORD-1 - Floating Point Subroutines[6]
  • 1 x () NORD-1 Mac Library[6]
  • 1 x () NORD-1 - SHORT MAC - Modular Assembler for NORD-1 computers[6]
  • 1 x () NORD - Circuit Diagram Symbols[3]
2016-06-30
the NORD-1 manuals below have been donated to Gandalf - he is getting a NORD-1 machine, he can make more use of them.
  • 1 x ND-01.004.01 () HARDWARE MANUAL NORD-1[6] single sided - ND–01.004.01 NORD-1 HARDWARE MANUAL
  • 1 x (01/1968) NORD-1 REFERENCE MANUAL, Complete instruction repertoire[6] single sided
  • 1 x (1970) NORD-1 MED TELETYPE TERMINAL[6] single sided

NORD-2B

  • 1 x (12/1970) NORD-2B - Hardware Manual - Volume 1 - Logic Diagrams[6]
  • 1 x (03/1971) NORD-2B - I/O System[2]

NORD-5

NORD-10

NORD-12

  • 1 x () NORD-12 Reference Manual[2]

NORD-20

other hardware

Software

Course material

  • 1 x () Operatørkurs (telex og NORD-10)[2]
  • 1 x (1973) ND - Brevkurs Introduksjon til Logisk Algebra og sifferkretsteknikk[9]
  • 1 x (10/1967) Introduksjon til datamaskiner og programmering i maskinkode av Lars Monrad-Krohn[2]
  • 1 x CF20 (01/1975) Course Manual CF20 - Introduction To Assembly Programming[2]
  • 1 x () Course Manual UNIO - Introduction TO NORD-10 CPU[6]
  • 1 x UH200 (04/1975) Course Manual UH200 - NORDCOM[2]

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 glued, binder format - see "binder format"
  2. 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 2.34 2.35 2.36 2.37 2.38 2.39 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50 2.51 2.52 2.53 2.54 2.55 2.56 2.57 2.58 2.59 2.60 2.61 2.62 2.63 2.64 2.65 2.66 2.67 2.68 2.69 stapled - stapled at edge
  3. 3.0 3.1 3.2 3.3 stapled, binder format
  4. 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 4.33 4.34 binder format - for four hole binders
  5. 5.0 5.1 5.2 spiral bound - metal or plastic spiral holds the pages
  6. 6.00 6.01 6.02 6.03 6.04 6.05 6.06 6.07 6.08 6.09 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 glued - glued together at edge
  7. 7.0 7.1 7.2 stapled in one corner
  8. 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 stapled - staples removed
  9. plastic binding